High-Capacity Waterfall Pump

High-Capacity Waterfall Pump
Product No. 19718
Find a Store In Stock
This high capacity waterfall pump is ideal for large waterfalls (3,600 gallons per hour).
  • Powers large waterfalls
  • Connects to 1 1/4, 1 1/2 and 1 3/4 in. ID Tuning and 1 1/2 PVC Pipe
  • Energy efficient
  • 5 year warranty

Can I rebuild the pumps? We have a HCP3600 High Capacity pump and it has lost its ability to pump the water to the waterfall. It still works as far as turning on and will pump a small amount of water.

Asked by: Randy56
No, but it probably just needs cleaning. Have you tried cleaning out the impeller? That is most likely where the issue is. If you tend to have hard water, use distilled white vinegar. BREX
Answered by: BREX
Date published: 2017-09-14

Can you use this waterfall pump with the Tetra BP1500 UV presurized filter then have the other side go to waterfall?

Asked by: Edumaop
You could, yes, but you will lose 40% of the flow rate by going through the pressurized filter. Determine how large or wide of a waterfall you want, and be sure to have at least 100 gph at the top of the waterfall for every inch of width (weir). For example, if you want a powerful 12" wide waterfall, your pump has to pump 1200 gph at the top of the waterfall, accounting for head, and other restrictions. BREX
Answered by: BREX
Date published: 2017-08-29
  • y_2017, m_11, d_18, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_19718, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tetrafish