GreenFree UV Clarifier Quartz Sleeve 2500 4000

GreenFree UV Clarifier Quartz Sleeve 2500 4000
Product No. 29583-00


Buy Now Find a Store In Stock
GreenFree UV Clarifier Quartz Sleeve - fits Bio-Actve Pressure Filters BP2500/BP4000 and Bio-Active Pressure Filters with UV Clarifier BP2500-UV/BP4000-UV.

Hello Ive got an older filter with a 18watt bulb in it. No model number....would you happen to know what sleeve i need? Thanks!

Asked by: Nater
If you have the GreenFree Clarifier, the model number is on the outer housing, as well as the lot code. We need the lot code. If you have the pressure filter, there should be a silver label on the side of the lid. If the label is missing, we need the height of the filter. Call 1-800-322-1266 for assistance. BREX
Answered by: BREX
Date published: 2017-09-13

What are dimensions

Asked by: Karenann
Of which unit? We make several units. BREX
Answered by: BREX
Date published: 2017-06-28

I'm having a hard time taking out the quartz sleeve from my 16788-01 clarifier for cleaning. Any suggestions as to how it should be removed? I don't want to break or damage the sleeve or unit.

Asked by: BobJoeWC
We recommend taking a flat head screwdriver, and gently inserting it into the cut out areas between the top edge of the quartz sleeve and the housing itself, and prying up. Keep circling around the unit, until you can no longer use the screwdriver to pry it up. Then take a soft cloth or rubber jar opener and grab hold of the quartz sleeve and pull. You will need to work it back and forth while you pull as well. BREX
Answered by: BREX
Date published: 2017-06-05

What is the correct size O ring to replace the old one. Do you have any tips on making sure the seal is a good one?

Asked by: Dylang
There are two o rings. They are US Standard Size 229 ID 2.359” (59.9 mm) XC 0.139” (3.53 mm). Hope this helps! BREX
Answered by: BREX
Date published: 2017-05-19

Hi the quartz sleeve fell out of the plastic ring can it be repaired with a silicone adhesive? And also i need the uv ballast replacement number please. 

Asked by: Halov250
We do not sell the ballast separately, unfortunately. In regards to the quartz sleeve, we would recommend purchasing a new quartz sleeve, rather than trying to repair it with a silicone adhesive, as such adhesives vary widely. If you have an older unit, and water damaged the ballast, we recommend simply replacing the entire unit. The warranty is 3 years on this item, and we would need a proof of purchase or lot code. BREX
Answered by: BREX
Date published: 2017-05-17

Quartz Sleeve for BP2500

Hello, I own BP2500 and the quartz sleeve was broken. I do have a spare PUV4000, could I use the quartz sleeve from PUV4000 on BP2500? It looks exactly the same to me. Thanks, Roy
Asked by: mujik
Hello Roy, Yes, the quartz sleeve is the same for both of them. BREX
Answered by: BREX
Date published: 2016-02-17

Quartz Sleeve for BP2500

I own both BP2500 and BP4000, and the Quartz Sleeve for BP2500 was broken. If I understand correctly, I could use the one on BP4000 for BP2500, could you please confirm? Thanks, Yihai
Asked by: mujik
Yes, they both take the same quartz sleeve. BREX
Answered by: BREX
Date published: 2016-02-17

What are the dimesions (diameter and length) of the Greenfree UV Clairifier Quartz Sleeve 1500 and 2500 Thank Youi

Asked by: TonyT1
Diameter of both is 2.25". Length of the 9 watt one is 7.25". Length of the 18 watt is 10". BREX
Answered by: BREX
Date published: 2015-09-24
  • y_2017, m_11, d_22, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_29583, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tetrafish