Pressure Filter Spare Part Kit

Pressure Filter Spare Part Kit
Product No. 19363-00

$42.99

Buy Now Find a Store In Stock
Bio-Active Pressure Filter Spare Part Kit - Fits BP1500, BP2500, and BP4000
Pressure Filter Spare Part Kit is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Best Customer Service Great rapid service, it did not fix my leak, but to company sent me a new unit, so thank you very much for all the great service and help. My Koi's in my pond are also very grateful, they love the clean water.
Date published: 2017-07-24
Rated 5 out of 5 by from The kit contains one each of all necessary spare parts. It appears a bit expensive. Since the kit has only one green clamp and I needed more than one, I called customer service. They took care of it right away and I am totally satisfied. Customer service could not be better.
Date published: 2015-05-31
  • y_2017, m_11, d_17, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_19363, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tetrafish

I need a large O ring for Tetra PFL1500. I also need replacements for Inlet port(from pump) and Outlet port(to pond) as they are both cracked. I can't figure out any options on your web site.

Asked by: Terrisloma
Those parts are not sold separately at this time. Just email us and we will send them to you at no charge. Techsupport.tetra-fish@spectrumbrands.com. BREX
Answered by: BREX
Date published: 2017-08-11

I can't get the lid on my filter to close tightly enough to fit the ring around it. I've never had this problem before. I called you and you sent a new o ring but still doesn't close tigh. Not sure what to do. Very frustrating.

Asked by: Karen l
Hi Karen, The o ring goes down into the groove on the top of the canister. Did you remove the old one first? If not, it will not go all the way down inside the groove. The o ring should be about an inch below the upper edge of the groove. If you don't see it, put your finger or a flathead screwdriver down in the groove and feel for it. Also, make sure there is no dirt in the groove or on the top that can prevent it from going all the way in. Last, but not least make sure you are lining up the clamps properly and that there is water in the filter so the bio active media is floating. BREX
Answered by: BREX
Date published: 2017-06-01

We have a Tetra Pond filter, the only # I can find on it is 21 B 27. Two of the latches had came off and since they were laying in the grass my husband ran over them with the lawn mower. They say Tetra Pond on the top. can you replace them?

Asked by: Graceycat
The number you provided is a lot code telling me it is 12 years old. We do make a repair kit that comes with one latch along with all of the o rings, a port cap, adapter, etc. Here is a link: http://www.tetra-fish.com/Pond/Products/pond-parts/pressure-filter-spare-part-kit.aspx. BREX
Answered by: BREX
Date published: 2017-04-24

I have a 2500 gallon filter with the numbers 19J28 on the side. Is this O ring kit the correct one?

Asked by: Gumper
19J28 is the lot code, not the item number. It is 11 years old. If it is a pressure filter, and not a gravity filter, yes, this kit will fit it. BREX
Answered by: BREX
Date published: 2017-04-12

It seems that so many people need just the o-ring that are only in the whole repair kit for $45 seems like a lot of money for a $3 part  is there any chance that there is somewhere I can get just the o-ring I need without getting the whole kit 

Asked by: the big hairy scary
There are several o rings that need to be replaced every year to two years. You can always try an auto parts store but we would recommend taking whichever o ring you are looking for with you. BREX
Answered by: BREX
Date published: 2017-04-03

Hi, You guys were nice enough to send me a replacement cap for the backflush for BP1500UV. But it does not have a washer. Therefore it will leak. How do I get a washer for it from you. Thanks so much

Asked by: CBslp
We've received your email and it is being taken care of, sorry for the inconvenience. BREX
Answered by: BREX
Date published: 2017-03-08

Is it possible to get the canister part of the filter only? Mine cracked. Remainder of the filter is fine

Asked by: allenh9
Only under warranty as it is not sold separately. Please call 1-800-526-0650 or email us at techsupport.tetra-fish@spectrumbrands.com. BREX
Answered by: BREX
Date published: 2016-07-06

I need the large gasket for the lid can I purchase just the partI need?

Asked by: wannabeejeep
It only comes with the entire repair kit. BREX
Answered by: BREX
Date published: 2016-06-15
  • y_2017, m_11, d_17, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_en_US, sid_19363, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tetrafish