AquaSafe

TetraPond AquaSafe pond water treatment
Product No. 16275
Find a Store In Stock

Pond water conditioner and dechlorinator.

Essential for all pond keepers! Normal tap water contains chemicals and metals that can harm pond fish. AquaSafe® quickly eliminates chlorine and chloramines, and neutralizes heavy metals. It also provides a protective colloid coating for fish. Reformulated for today's municipal water.

This product comes in the following sizes: 8.4 fl oz, 16.9 fl oz and 101.4 fl oz.
AquaSafe® is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Great starter solution Follow the instructions as stated put in my tank 12 hours later. Added My fish and they're thriving in the water
Date published: 2016-03-07
  • y_2018, m_11, d_18, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_16275, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tetrafish

My pond is 7cubes filled with 250ml of Tetra aqua safe after filling it with new water from the tap... how long must I wait before I can put in the fish

Asked by: Ndhuna
I don't really understand what size it is, but basically if you are replacing all of the water, wait around 30 minutes, if you are doing a small water change, you only need about 5 minutes or less. BREX
Answered by: BREX
Date published: 2018-10-02

how long does it need to be in the pond before i can put the fish in? it's 250 gallons

Asked by: dan123
If you are treating all brand new water, we recommend at least half an hour. 250 gallons is a lot of water to treat and you want to be sure it is completely safe. BREX
Answered by: BREX
Date published: 2018-08-29

filling new pond with tap water added aqua safe how long do l leave it before adding fish

Asked by: stoneloach
For a brand new pond with all new water, we recommend 30 minutes at least, but it depends on how large it is as well. The larger it is, the longer you should wait. Small container ponds should be ready in 5 minutes or less. BREX
Answered by: BREX
Date published: 2018-08-28

How much of this do i put in a pond of 133 ltrs

Asked by: Eddiej
Please contact our office in the U.K., as the products we sell in other countries are not formulated the same as the ones we sell here in the U.S. https://www.tetra.net/en/en. BREX
Answered by: BREX
Date published: 2018-08-01

The new bottle of Pond AquaSafe that I bought contains different ingredients than my old one. It now contains mineral salts and sodium thiosulfate. Is this still safe to use in water that wildlife and pets will drink from?

Asked by: shopper35
While we have never tested any formula of this product on species other than pond fish, there are no harmful ingredients so it should be safe, yes. BREX
Answered by: BREX
Date published: 2018-07-19

Is Aquasafe suitable for water that is treated with chlorine dioxide?

Asked by: Hands
Yes, it removes chlorine dioxide. BREX
Answered by: BREX
Date published: 2018-07-16

How long does it take to treat the water? Or how long should I wait to put fish back in?

Asked by: Samson1234
Typically, less than 5 minutes, unless you have a large pond and are treating all brand new water, then you may want to wait more like 15 minutes. BREX
Answered by: BREX
Date published: 2018-03-22

will this product help reduce calcium biuld up in my filter

Asked by: digraf
No. You can remove it with white vinegar, but if your water has a lot of calcium carbonate in it, you cannot prevent the buildup. BREX
Answered by: BREX
Date published: 2017-09-13
  • y_2018, m_11, d_18, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_US, sid_16275, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_tetrafish